工程師英文自我介紹

　　當?shù)竭_一個新的環境后，可能需要我們進行自我介紹，通過自我介紹可以得到他人的認識。千萬不能認為自我介紹隨便應付就可以，下面是小編收集整理的工程師英文自我介紹，僅供參考，歡迎大家閱讀。

工程師英文自我介紹1

　　Good morning. It's a pleasure for me to be here in front of you to present myself. My name is xx, and I am a candidate for the position of Mechanical EngineerI graduated from xx university, majored in Category:Machine Design & Manufacturing and Their AutomatioFamiliar with optimization of large mechanical system and key parts with equal-strength principlemechanical system of V60, V90 and V80，and optimization of slewing bearings, main bearingsHAZOP and technique to analyze safety issues in design and operation processSix Sigma and process to develop new project and upgrade quality to meet and exceed customer needsGood communication and cooperation, and achieve uniform actions with team without power of authority and organization level20xx/12--Present,redesign and localization of yaw gear for V60.

　　Participant, responsible for DVVP of torque limiter in yaw gear V602015/10--20xx/12: quality upgrade of main bearing from for analysis and calculation of the root cause and corrective actions for the improvement together with supplier20xx/3--20xx/4 As mechanical engineer and bearing specialist, responsible for design verification and validation of yaw system, blade bearings, main bearings and service craneNothing is invincible,I believe that I can do well anything.

工程師英文自我介紹2

　　Good morning. It's a pleasure for me to be here in front of you to present myself. My name is x, and I am a candidate for the position of Mechanical EngineerI graduated from x university, majored in Category:Machine Design & Manufacturing and Their AutomatioFamiliar with optimization of large mechanical system and key parts with equal-strength principlemechanical system of V60, V90 and V80，and optimization of slewing bearings, main bearingsHAZOP and technique to analyze safety issues in design and operation processSix Sigma and process to develop new project and upgrade quality to meet and exceed customer needsGood communication and cooperation, and achieve uniform actions with team without power of authority and organization level20xx/12--Present,redesign and localization of yaw gear for V60.Participant, responsible for DVVP of torque limiter in yaw gear V602015/10--20xx/12: quality upgrade of main bearing from supplier.

　　responsible for analysis and calculation of the root cause and corrective actions for the improvement together with supplier20xx/3--20xx/4 As mechanical engineer and bearing specialist, responsible for design verification and validation of yaw system, blade bearings, main bearings and service craneNothing is invincible,I believe that I can do well anything.

工程師英文自我介紹3

　　Good morning/afternoon/evening, my name isXXX . It is really a great honor to have this opportunity/chance to introduce myself. I would like to answer whatever you may raise, and I hope I can make a good performance today.

　　I am a third year master major in automation at Shanghai Jiao Tong University, P. R. China. Withtremendous interest in Industrial Engineering, I am writing to apply for acceptance into your Ph.D. graduate program.

　　In 1995, I entered the Nanjing University of Science & Technology (NUST) -- widely considered one of the China’s best engineering schools. During the following undergraduate study, my academic records kept distinguished among the whole department. I was granted First Class Prize every semester,In 1999, I got the privilege to enter the graduate program waived of the admission test.

　　At the period of my graduate study, my overall GPA(3.77/4.0) ranked top 5% in the department. In the second semester, I became teacher assistant that is given to talented and matured students only. This year, I won the Acer Scholarship as the one and only candidate in my department, which is the ultimate accolade for distinguished students endowed by my university. Presently, I am preparing my graduation thesis and trying for the honor of Excellent Graduation Thesis.

　　Research experience and academic activity

　　When a sophomore, I joined the Association of AI Enthusiast and began to narrow down my interest for my future research. With the tool of OpenGL and Matlab, I designed a simulationprogram for transportation scheng system. It is now widely used by different research groups in NUST. I assumed and fulfilled a sewage analysis & dispose project for Nanjing sewagetreatment plant. This was my first practice to convert a laboratory idea to a commercial product.

　　In retrospect, I find myself standing on a solid basis in both theory and experience, which has prepared me for the Ph.D. program. My future research interests include: Network Scheng Problem, Heuristic Algorithm research (especially in GA and Neural network), Supply chain network research, Hybrid system performance analysis with Petri nets and Data Mining.

工程師英文自我介紹4

　　I’m Cheers.Lee, I’m twenty-six year old, I majored in E-busine and with a bachelor degree.I’m single.And I love software testing, as the software quality is vital to the company’s customer, it also could improve the company’s image, so quality is the best policy.We must devote all my energy to aure the software quality.

　　The position which I’ve come to apply is senior software testing engineer.I have three years work experience, one year and a half of function testing experience and one year of performance and automation testing experience.I have been reading up on software testing, especially on performance testing and automation testing.I’m quite familiar with performance testing toolLoadRunner, and familiar with automation testing tool QTp.I’m good at developing performance testing script base on C language in web system, and also have good skills in develop QTp script.

　　As we all know that software performance has become more and more important, while thousands of the users log in the system or visit the website simultaneously, the problem may occurred, the system crash or the server deny to provide the service to the user, so the performance testing need to be done before the software delivered to our customers.

　　We also benefit from the automation testing.There is always a lot of function testing or regreion testing need us to finish in a short time.But we do not have enough time and sufficient human resource to complete it, how should we do? So the automation testing is the best solution.It cut down the costs, improve the work efficiency, save our time and energy.Its advantage is not merely as so.

工程師英文自我介紹5

　　good morning, my name is jack, it is really a great honor to have this opportunity for a interview, i would like to answer whatever you may raise, and i hope i can make a good performance today, eventually enroll in this prestigious university in september.

　　now i will introduce myself briefly, i am 21 years old, born in heilongjiang province, northeast of china, and i am currently a senior student at beijing university. my major is packaging engineering. and i will receive my bachelor degree after my graduation in june.

　　in the past 4 years, i spend most of my time on study; i have passed cet4/6 with ease. and i have acquired basic knowledge of packaging and publishing both in theory and in practice. besides, i have attended several packaging exhibition hold in beijing, this is our advantage study here, and i have taken a tour to some big factory and company. through these i have a deeply understanding of domestic packaging industry.

　　compared to developed countries such as us, unfortunately, although we have made extraordinary progress since 1978, our packaging industry are still underdeveloped, mess, unstable, the situation of employees in this field are awkward. but i have full confidence in a bright future if only our economy can keep the growth pace still.

　　i guess you maybe interested in the reason itch to law, and what is my plan during graduate study life, i would like to tell you that pursue law is one of my lifelong goal, i like my major packaging and i won’t give up, if i can pursue my master degree here i will combine law with my former education.

　　i will work hard in these fields, patent, trademark, copyright, on the base of my years study in department of p&p, my character? i cannot describe it well, but i know i am optimistic and confident.

　　sometimes i prefer to stay alone, reading, listening to music, but i am not lonely, i like to chat with my classmates, almost talk everything, my favorite pastime is valleyball, playing cards or surf online. through college life, i learn how to balance between study and entertainment. by the way, i was a actor of our amazing drama club. i had a few glorious memories on stage. that is my pride.

工程師英文自我介紹6

　　My name is , this year is 21 years old, graduated from PLA information engineering university computer science and technology professionals, in the four years of college life, I have grasped the development and application of technology, but also in the development of the network have the profound understanding. So to lay a solid foundation of professional knowledge. In the thoughts and behavior, thought progress, positive enterprising, has the self-confidence, have very strong work sense of responsibility and the dedication to work, work steadfast, bears hardships and stands hard work, have a high comprehensive quality training.

　　During the period of school has many social practice experience, has participated in college online virtual laboratory development needs analysis, the university period as many times more course lesson representative. Professional knowledge, proficient in C/C programming language, capable of using the language for software development; Master Visual C 6.0 programming software, has the rich based on Windows platform write software experience. Understand TCP/IP protocol, familiar with the basic principle of database; Have relatively rich web design and development experience, was instrumental in construction and maintenance institute's web site.Actively participate in a number of research projects. Has a strong

　　professional ability. Have a solid Core Java foundation, good programming style; Familiar with Tomcat, Jboss server and so on, familiar based on Linux and Unix environment of software development.

　　Although the actual work experience is not very full, but point four years developed my full confidence and professional dedication and solid base of the discipline knowledge and strong professional skills, four years of military school life, I strict demands on themselves, and consciously, observance of discipline and

　　punctuality. I am honest and have the sense of responsibility, has the independent enterprising character, is industrious hands, good at one's brains, adapt to the new environment ability. Can be in the shortest time to finish from students to professional staff transformation, try your best into the new work and life. After four years of study, training I become a moral right, has a strong will and a lofty ideal, has the enterprising spirit and team cooperation spirit of good students. Believe what I have knowledge and competence can fit for any hard work. If I am lucky enough to become a member of your company, I will put all the youth and enthusiasm bend force into work, obtain due scores, for the development of the company to contribute their strength.

　　我叫，今年21歲，畢業于解放軍信息工程大學計算機科學與技術專業，在四年的學習生活中，我系統地掌握了開發與應用方面的技術，同時也對當今網絡的發展有了深

　　刻的認識。因此打下扎實的專業基礎知識。在思想行為方面，思想上進，積極進取，有自信，有很強的工作責任感和事業心，工作踏實，吃苦耐勞，有較高綜合素質修養。

　　在校期間有多次社會實踐經歷，曾參與過學院網上虛擬實驗室開發的需求分析，大學期間多次擔任多課程的課代表。專業知識上，精通C/C++編程語言，能夠熟練運用上述語言進行軟件開發;掌握Visual C++6.0編程軟件，有豐富的基于Windows平臺編寫軟件的經驗;了解TCP/IP協議，熟悉數據庫基本原理;具有較為豐富的網站設計開發經驗，曾經協助建設和維護學院網站。積極參與多項科研項目。具有很強的業務能力。擁有扎實的Core Java基礎，良好的編程風格;熟悉Tomcat，Jboss服務器等，熟悉基于Linux及Unix環境下的軟件開發。

　　雖然實際工作經驗不是很足，但軍校四年培養了我充分的.自信心和敬業精神以及扎實的學科基礎知識和較強的專業技能，四年軍校生活中，我嚴格要求自己，自覺、遵紀、守時。本人坦誠且有責任心，有獨立進取的品性，勤于動手、善于動腦，適應新環境能力很強。能在最短時間內完成從學生到職業工作人員的轉型，盡自己最大的努力融入新的工作生活。 經過四年的學習，培養我成為一名品德端正、意志堅強、有崇高理想，具有進取精神和團隊合作精神的出色的大學生。相信我所具有的知識和處事能力完全可以勝任任何困難的工作。如我有幸成為貴公司的一員，我將把所有的青春和熱情傾力投入到工作中，取得應有的成績，為公司的發展壯大貢獻自己的力量。

工程師英文自我介紹7

　　good morning, my name is jack, it is really a great honor to have this opportunity for a interview, i would like to answer whatever you may raise, and i hope i can make a good performance today, eventually enroll in this prestigious university in september. now i will introduce myself briefly,i am 21 years old,born in heilongjiang province ,northeast of china,and i am curruently a senior student at beijing uni.my major is packaging engineering.and i will receive my bachelor degree after my graduation in june.in the past 4 years,i spend most of my time on study,i have passed cet4/6 with an ease. and i have acquired basic knowledge

　　of packaging and publishing both in theory and in practice. besides, i have attend several packaging exhibition hold in beijing, this is our advantage study here, i have taken a tour to some big factory and company. through these i have a deeply understanding of domestic packaging industry. compared to developed countries such as us, unfortunately, although we have made extraordinary progress since 1978,our packaging industry are still underdeveloped, mess, unstable, the situation of employees in this field are awkard. but i have full confidence in a bright future if only our economy can keep the growth pace still. i guess you maybe interested in the reason itch to law, and what is my plan during graduate study life, i would like to tell you that pursue law is one of my lifelong goal,i like my major packaging and i won't give up,if i can pursue my master degree here i will combine law with my former education. i will work hard in thesefields ,patent ,trademark, copyright, on the base of my years study in department of p&p, my character? i cannot describe it well, but i know i am optimistic and confident. sometimes i prefer to stay alone, reading, listening to music, but i am not lonely, i like to chat with my classmates, almost talk everything ,my favorite pastime is valleyball,playing cards or surf online. through college life,i learn how to balance between study and entertainment. by the way, i was a actor of our amazing drama club. i had a few glorious memory on stage. that is my pride.

工程師英文自我介紹8

　　Good morning，ladies and gentlemen!

　　It is really my honor to have this opportunity for an interview. I hope I can make a good performance today. Im confident that I can succeed. Now I will introduce myself briefly. I am 26 years old，born in Shandong province. I graduated from Qingdao University. My major is electronics.

　　And I got my bachelor degree after my graduation in the year of 20xx. I spent most of my time on study，and I’ve passed CET-6 during my university. And I’ve acquired basic knowledge of my major. It is my long cherished dream to be an engineer and I am eager to get an opportunity to fully play my ability.

　　In July 20xx，I began working for a small private company as a technical support engineer in Qingdao city. Because there was no more chance for me to give full play to my talent，so I decided to change my job. And in August 20xx，I left for Beijing and worked for a foreign enterprise as an automation software test engineer.

　　Because I want to change my working environment，Id like to find a job which is more challenging. Moreover，Motorola is a global company，so I feel I can gain a lot from working in this kind of company. That is the reason why I come here to compete for this position. I think Im a good team player and a person of great honesty to others. Also，I am able to work under great pressure. I am confident that I am qualified for the post of engineer in your company.

　　That’s all. Thank you for giving me the chance.

工程師英文自我介紹9

　　Good morning, my dear professors!It is my great honor to take this interview. Thank you very much for giving me the chance!

　　My name is Yan li，I come from Liao ning Province , I am 23 years old. I am an undergraduate of Shandong University at Qingdao .My major is Mechanical design manufacturing and automation. The beautiful campus sceneries provide me an excellent study environment. After about three years’ hard work, I have learned most of the courses of my specialty and also do well in them.During the past 3 years in the university, as an undergraduate student, I have been working diligently at myspecialty. I have built up a solid foundation for professional knowledge and comprehensively improved my quality. I got a lot of scholarships, once I feel I fall behind others, I will find the reason as soon as possible and try my

　　utmost to catch up with them. And just owning to this, I could concentrate on my study and succeeded in the end. I am confident that my solid education background will lay me a foundation to fulfill my bachelor degree courses! In my spare time, I like to read books, listen to Pop music, watch movies and doing sports. In all sports , volleyball is my favorite. They keep me in good health, full of energy and breed optimism towards life. Besides, I really enjoy watching English films. It can not only kill time, but also excise my listening skills. I know my English is not good enough, and I will continue to study.I have learnt a lot from it not only how to do research , but also team sprit and how to communication withothers .So I love my major. I am long for doing research in this field. However, I think further study is urgent for me to realize my dream. I think the postgraduate study can enrich my knowledge and make the competence in my future career.

　　All in all, Shandong University at Weihai, with a highly qualified faculty and strong academic environment is the university I have long stayed for four years. I believe that I am a very qualified applicant for admission into your Master of Petroleum Engineering and can contribute to the enrichment or diversity of our university. I hope I could get the opportunity to finish my postgraduate courses in it. I have the confidence because I have such ability! I am a girl who is fervent, outgoing and creative. At the same time, I think I am quick in mind and careful in everything. I am looking forward to my postgraduate studies and life. I will soon prove that your decision of choosing me is the wisest. Thank you for giving me such a valuable opportunity!That' all. Thank you for your attention!Thank you!

工程師英文自我介紹10

　　My name is x, x, a college from electronic professional graduates. three years, the teachers teaching, students love and nurture all aspects, so i got a lot of knowledge, know a lot of sense, as a beginner, i have excellent ability to learn and willing to learn, dare to innovate, and constantly strive for excellence; as a participant, i have honest character, full of team spirit; as a leader able to do things i have, resolute style, good communication and interpersonal coordination. have a strong endurance, willpower, and hard-working quality, serious and responsible work, proactive, optimistic personality persistent, dare to face the difficulties and challenges.

　　In order to better adapt to society in need of, i grasp the premise of the school curriculum to make full use of spare time, read a lot in extra-curricular reading, to broaden their knowledge.

　　Through professional courses, i now have strong computer skills and professional use of the software. proficient in office, wps software, skilled use of quartus ii, max + plus ii, altium designer 6, altium 20xx, protel 99 se software, proficient in verilog hdl, vhdl, c language. computer hardware, i am familiar with principles of its composition, can skillfully assembled by computer to an independent computer to rule out all kinds of trouble.

　　As a university student about to graduate, i have confidence to meet new challenges, and overcome the challenge of self, i may not the best, but it must be most carefully, and please believe me and give me time to achieve self-value opportunities.

工程師英文自我介紹11

　　Good morning, my dear professors!It is my great honor to take this interview. Thank you very much for giving me the chance!My name is Yan li，I come from Liao ning Province , I am 23 years old. I am an undergraduate of Shandong University at Qingdao .My major is Mechanical design manufacturing and automation. The beautiful campus sceneries provide me an excellent study environment. After about three years’ hard work, I have learned most of the courses of my specialty and also do well in them.During the past 3 years in the university, as an undergraduate student, I have been working diligently at my specialty. I have built up a solid foundation for professional knowledge and comprehensively improved my quality. I got a lot of scholarships, once I feel I fall behind others, I will find the reason as soon as possible and try my utmost to catch up with them. And just owning to this, I could concentrate on my study and succeeded in the end. I am confident that my solid education background will lay me a foundation to fulfill my bachelor degree courses!

　　In my spare time, I like to read books, listen to Pop music, watch movies and doing sports. In all sports , volleyball is my favorite. They keep me in good health, full of energy and breed optimism towards life. Besides, I really enjoy watching English films. It can not only kill time, but also excise my listening skills. I know my English is not good enough, and I will continue to study.

　　I have learnt a lot from it not only how to do research , but also team sprit and how to communication with others .So I love my major. I am long for doing research in this field. However, I think further study is urgent for me to realize my dream. I think the postgraduate study can enrich my knowledge and make the competence in my future career.

工程師英文自我介紹12

　　I guess you maybe interested in the reason itch to law, and what is my plan during graduate study life, I would like to tell you that pursue law is one of my lifelong goal, I like my major

　　packaging and I wont give up, if i can pursue my master degree here I will combine law with my former education. I will work hard in these fields ,patent ,trademark, copyright, on the base of my years study in department of p&p, my character? i cannot describe it well, but i know i am optimistic and confident. sometimes i prefer to stay alone, reading, listening to music

　　6 good morning, my name is jack, it is really a great honor to have this opportunity for a interview, I would like to answer whatever you may raise, and I hope I can make a good performance today, eventually eoll in this prestigious university in September

　　I guess you maybe interested in the reason itch to law, and what is my plan during graduate study life, I would like to tell you that pursue law is one of my lifelong goal, I like my major packaging and I wont give up, if I can pursue my master degree here I will combine law with my former education. I will work hard in these fields, patent, trademark, copyright, on the base of my years study in department of p&p, my character? I cannot describe it well, but I know I am optimistic and confident. Sometimes I prefer to stay alone, reading, listening to music

工程師英文自我介紹13

　　My name is xxx, began studying at Beida Jade Bird in September 20xx, the main .net engineer. Beida Jade Bird training after a year and a half, to fully grasp the basics of software development, now has completed an independent software development, software engineering can also project development team. I believe in the future of work and learning will be very competent. Beida Jade Bird as a very happy and proud.

　　Usually interested in playing basketball, so I trained really confident, optimistic, positive personality. Because not very talkative, so a lot of time in bookstores and books with friends. But that does not mean I introverted. Because I love to read.

　　Personally prefer the phrase: any wide sea diving, the days of the bird. Xxx company is proud to be able to come, please exhibitions, very happy together to create tomorrow's brilliant colleagues!

工程師英文自我介紹14

　　I’m Cheers.Lee, I’m twenty-six year old, I majored in E-business and with a bachelor degree. I’m single. And I love software testing, as the software quality is vital to the company’s customer, it also could improve the company’s image, so quality is the best policy. We must devote all my energy to assure the software quality.

　　The position which I’ve come to apply is senior software testing engineer. I have three years work experience, one year and a half of function testing experience and one year of performance and automation testing experience. I have been reading up on software testing, especially on performance testing and automation testing. I’m quite familiar with performance testing toolLoadRunner, and familiar with automation testing tool QTP. I’m good at developing performance testing script base on C language in web system, and also have good skills in develop QTP script.

　　As we all know that software performance has become more and more important, while thousands of the users log in the system or visit the website simultaneously, the problem may occurred, the system crash or the server deny to provide the service to the user, so the performance testing need to be done before the software delivered to our customers.

　　We also benefit from the automation testing. There is always a lot of function testing or regression testing need us to finish in a short time. But we do not have enough time and sufficient human resource to complete it, how should we do? So the automation testing is the best solution. It cut down the costs, improve the work efficiency, save our time and energy. Its advantage is not merely as so.

工程師英文自我介紹15

　　I am * * * College of engineering construction project cost management system of professional students. During college, I with outstanding achievements, the school has won a comprehensive, national motivational scholarships, and has been rated as "excellent students" honorary title, in order to meet the needs of professional knowledge.

　　In the cost of the specialty, I studied engineering cost control > and < < < >, engineering economics, municipal engineering measurement and valuation "," construction project measurement and valuation >, < installation > < Engineering Measurement and valuation, contract management and bidding >, < > building audit and other professional courses and skilled operation. The application of pricing software, Huaping reinforcement calculation software and CAD software architecture.

　　The school often do professional curriculum design, and carries on the scene a week to observe the internship site, with senior engineer Huang workers learning and practice, grasp the application of theodolite on the site, the test block of concrete, steel banding and familiar with reinforcement diagram, the solution should handle construction visa etc.. Theoretical knowledge and practice in school together, more full grasp of professional skills. The study, I participated in many social practice activities, to exercise their own hard work, strict in demands of wind.

　　Modern society is in need of compound talents of combining theory and practice. I will through continuous learning to improve themselves, to prove himself in practice. Strive to realize their value of life, to contribute to the development of your company.

　　電氣工程師簡歷

　　Name: Mr. X sex: Male

　　Marital status: unmarried Miao Nationality:

　　Residence: Hunan - Jishou age: 25

　　Location: Guangdong - Dongguan height: 163cm

　　Hope: Guangdong

　　That position: Electrical / electronics components - Electrical Engineer

　　Position: Electrical

　　Education experience

　　20xx-09 ~ 20xx-07 of Shaanxi University of Science and Technology haojingcollege electrical engineering machine automation degree

　　Training experience

　　20xx-05 to 20xx-07, JAVA, JAVA, JAVA skills certificate

　　Work experience has been 1 years, February work experience, worked in 1 companies

　　* * (20xx-03 ~)

　　Property: private enterprise category: instrumentation, electrical equipment, industrial automation

　　Position: electrical engineer job category: RD/ Engineer

　　Job description: my job is mainly work is the design of the electrical part of the development of automation equipment, including the idea of equipment process, selection of electrical materials (and suppliers), drawing electrical drawings (by AUTOCAD20xx), the program (Matsushita, OMRON, Kean, PLC I/O distributed communication setup etc.), write weinview touch screen (password settings, alarm program and all button mapping), site commissioning of equipment and other electrical related work.

　　Reasons for leaving: changing working environment

　　Project experience

　　G-cell upper jig machine, G4 upper jig machine, T0 upper jig machine (20xx-05 to present)

　　Position: Electrical Engineer

　　Project Description: the project is mainly processing a new green energy technology products provide precision automatic processing equipment: all kinds of fixture on machine is the battery into the fixture (send a one-time disposable batteries, into two battery and four battery) battery which process includes a two-dimensional code reading (scan code gun SR-D100 with Kean SR-D100H, bar code gun) fixture one-dimensional code scanning (DATALOGIC scan code equipment), the fixture is divided into ten layers in the lift of the electrical core to ensure precise position in the electric core fixture fixture which can charge by mechanical hand, to the electric core after entering the next A stage to ensure the clamping pressure of the electrical core inside the air squeezed out, and finally by the mechanical hand pulled down the outlet position of AGV car fixture away into a machine to send into (discharge).

　　The above is the main process of the project

　　Electrical devices mainly use electrical project are: FP-X minicomputer and FP2SH two medium Panasonic PLC, Kymmene drive, Shinano drive and Panasonic A5 series driver, PEINIC X-ray power, linear optical fiber, Panasonic pressure gauge, electrical device safety.

　　Responsibility description: I mainly undertake in these projects, the selection of parts materials, drawing electrical drawings, write part of the program, the touch screen is written. Debugging device, program optimization of equipment in operation, and the summary of machine problems processing.

　　Technical expertise

　　Professional Title: electrical engineering automation machine

　　Computer level: non computer major in University, grade three (partial soft)

　　Computer skills: familiar with office software, familiar with the C language, JAVA language

　　Technical expertise: PLC programming (Panasonic, MITSUBISHI, OMRON), touch screen preparation, drawing electrical drawings, debugging electrical components

　　Language ability

　　Mandarin: fluent in Cantonese: General

　　English: English major CET-6 (440), IELTS (5) fluent spoken English

　　English: fluent in English: fluent

　　Job intention

　　Directions: Electrical Design (PLC program), precision equipment manufacturing industry, undertake electrical design project

　　Other requirements: the bag eats, travel is not long (no more than 1 months)

　　Their own situation

　　Self evaluation: I am positive, studious, actively cooperate with colleagues, comply with company rules and regulations, earnestly fulfill the tasks assigned by the company.

　　Hobbies: hiking, tea, singing etc.

　　Awards

　　National motivational scholarships 20xx-07-06

　　Related certificate

　　Bachelor's degree certificate (* * *) 20xx-03-07

　　The graduation certificate (* * *) 20xx-07-11

【工程師英文自我介紹】相關文章：

機械工程師英文自我介紹02-03

機械工程師英文的自我介紹08-26

機械工程師英文面試自我介紹03-26

電氣工程師英文自我介紹范文07-28

軟件工程師面試英文自我介紹07-12

軟件測試工程師面試的英文自我介紹06-13

軟件測試工程師面試英文自我介紹03-26

機械工程師面試英文自我介紹通用01-04

軟件測試工程師面試英文自我介紹范文03-08

跳槽英文自我介紹-英文自我介紹12-27