工廠操作工英文自我評價

　　在日常學習、工作和生活中，我們都不可避免地要使用自我評價，自我評價會促使我們進行自我驗證，從而為自我發(fā)展提供動力。那么問題來了，到底應(yīng)如何寫一份恰當?shù)淖晕以u價呢？下面是小編整理的工廠操作工英文自我評價，供大家參考借鑒，希望可以幫助到有需要的朋友。

　　工廠操作工英文自我評價 1

　　In the twinkling of an eye, one years work is spent in a tense and busy, the new year new starting point new opportunities and new challenges, I will work harder to learn, will improve my ability to work, do not live up to you Expectations, I will strive to do their jobs.

　　Since taking part in the work, I earnestly complete the work, study hard, think positively, individual ability rises gradually. I am thinking, learning, work has made new progress, but I also recognize that they have too many shortcomings, theoretical knowledge and low level of operation, skills are not strong. As a qualified operator, we must learn the rules of production equipment operating procedures, process safety knowledge and process parameters. Outside the loading operation process to pay attention to many things, no small mistake, there will be a big life-threatening risk of loss of economic dime, so everyone should take their own work to do to ensure safety in production . (Internal control of the job is very important, single-system, data, audit, monitoring, communication, communication, do not take five and so on.Three check six pairs, check the driver tank volume table, pressure filling certificate, dangerous transport card ). In addition, the train is running fast also rely on the front, because just to work soon, in terms of experience, or from thinking there are many deficiencies in these areas I got the company leadership, department heads and squad workers of the correct guidance, The dragon is to carry out job training skills training, so that we have a better opportunity to enhance their theoretical knowledge of security and operational skills, in the learning process, I have a lot of uncertainty, we always patiently explain to me, I would like to express my heartfelt gratitude to all of you.

　　In short, into the xx company has more than a year (in the car loading unit under the leadership of master Ke) along the way, enjoy the pain, but also the luxury of happiness, there is no credit for labor, but either laughter or tears, Working for life, working for our dreams, we are brave to face a lot of difficulties, I think these will be the growth of each of us to the glorious stage of bit by bit.

　　xx upcoming, future work may be more difficult, more and more competition will give us a great deal of pressure, as long as the heart relaxed, the pressure into motivation, this is what we have been continuous progress Of the common ground, with the share of the ideals of hard work we will do better!

　　工廠操作工英文自我評價 2

　　Under the leadership of the teacher we lined up into the Shaanxi flames limited liability companys production workshop, after the relevant person in charge of the distribution I and the other four students were assigned to the bakelite workshop.

　　Into the workshop, the master of the workers on the performance of our very happy, enthusiastic greeting me, as far as possible to me to introduce me to do the work, I just came in a sense of tension swept away. In the workers under the masters explanation we understand the next weeks work content. And found that we seem to be doing a great cause, because we processed the antenna is to be installed in the tank above. And many of these antennas are sold abroad. The thought of their use of the antenna in some of their own to do, and my heart can not say proud.

　　The antenna body has four sections, connected to one from the low to high diameter in turn, from the bottom to the top in turn; a connecting base, 2 with a fixed rope, fixed rope and a metal, is used to connect the antenna , The main package a total of 7 positions, 7 accessories can be loaded into, and then a line of the rope, the antenna package folded to carry.

　　Our work that trouble to not trouble, but need to have enough first is to use a small blade to a white plastic end of a dust use the blade is very hand the school is very difficult to take, a long time, the hand will be blisters, even though we have to clean up, or inevitable, but the thought of these workers uncle for decades to do the job, admiration Feeling arises spontaneously. They are for the motherland of tomorrow, not afraid of suffering, then we have nothing to fear.

　　The second task is to remove the antenna under the core, there is the fiberglass shell to the gelatinization treatment, it seems simple, it is not true, because the plastic outside the plastic film is very hard, accidentally cut Finger, the master of the workers in the explanation, we found a small hand does not cut the hand tips. The third task is the casing, in order to prevent the antenna interference, will use the plastic tube to isolate the antenna.

　　The fourth work has a good name to listen to this is a high-tech live, in a one-meter-long plastic tube wearing a thin copper wire is only 0.3 ly is not an easy thing, even more depressing is that sometimes when you wear to the end of the moment, just so bad 2 cm, just can not pass, and my heart that hate Egypt do not know who invented the antenna practice, although complaining There are still, but we still learn to make fun of, we five people started the game, to see who wear the fast and. In this way the work was also very easy to solve. We summed up the truth - do not just have the patience to do this, there is another condition, that is luck, good luck, smooth. Bad luck, then move.

　　The fifth task is welding, this welding is different from the radio welding, it is the soldering iron fixed, mobile components to complete the welding. As the temperature is high, it requires us to fast, accurate, and requires a beautiful weldment.

　　The sixth task is to insulate small transformers with insulating work is the most easy to complete. Is the best learning.

　　The seventh job is the mat, although good to do, but need a little use there are many components will not affect the role of the antenna, so even if the production is not very qualified, in order not to waste, will continue to use. This requires a little more effort.

　　The eighth task is to tie the line, it sounds very easy to do it is not simple. The reason is not only to tie, but also tied labor, so as not to tamper with the antenna in the glass tank. Worker master taught us to tie the method, the beginning of the tie is very awkward, tied the number of more, even find work is the door to fun.

　　Week internship is the deepest feelings of some of the Fiberhome Group of dedicated workers. Here the workers are very amiable and friendly people, often some humorous words to our work to add fun. The most touching is that when we can not personally participate in the Olympic torch relay, they play radio for us so that we hear the whole process of tracking the torch relay.

　　The rapid development of modern science and technology era, the types of high-tech products more and more, production technology and production processes are also different. But no matter what kind of products, from raw materials to produce products are processed to follow certain production principles, through a number of major equipment and process to complete. And never try to use machines instead of manual, no matter how fast the machine can not replace human labor. And this is not only labor, or passion to pass.

　　工廠操作工英文自我評價 3

　　Since the beginning of my career, I have been constantly strengthening my self-cultivation, striving to improve the ideological and moral level, earnestly carry out the deepening of the cultural and professional knowledge, continue to explore new knowledge, forge ahead, and actively carry out intelligent range The work, the complete performance of a electricians work responsibilities, from a good example to take the lead role. And actively participate in technological exchanges and technological innovation activities, the earth to do a good job, help, with the role, and fully completed the tasks assigned to the higher levels and targets in the companys production and development play its due role.Now I have been working since the professional and technical work are summarized as follows:

　　First, consciously strengthen theoretical study, and strive to improve personal qualities

　　Without a firm and true political orientation, there will be no positive guiding ideology. In order to continuously improve their political and ideological quality, the past few years I have been very concerned about national affairs, concerned about the situation at home and abroad, combined with the impact of changes in the situation of enterprises to analyze and put this idea into practical action to the production process to ensure In their thinking and action has always been consistent with the party and enterprise. At the same time, this idea into the work and study, the constant pursuit of their own progress. In order to be successful, a persons career must first learn how to behave! Especially in our highly technical work, to see things carefully, do things to concentrate on, to learn to be modest. Can not have the slightest sloppy and error. All the first work attitude to correct, have a good professional quality, work to be serious and responsible, subject to leadership arrangements, open to others to listen to advice and advice, to unite colleagues, courtesy, warm service.

　　Second, correct work attitude, play a leading role

　　I fully understand the importance of mechanical and electrical management during the construction period. In particular, it contains most of the invisible electrical infrastructure and engineering. It is necessary to supervise and inspect the problems at any time. We must solve the problems and never hastily. Otherwise, Eradication, which we place mechanical and electrical management in front of a test and responsibility. As an electrician, the responsibility and the burden of my duty. Therefore, in the usual work, I made myself some of the strict requirements: one in the face of dirty tired and bitter at work to grab the front of the workers dry, and more than the workers do the next; In the face of technical problems is to come forward and do their best to overcome technical difficulties; I always adhere to do my best to do everything to the interests of the company. Third, I asked myself to be responsible; I think that since he is an electrician, then the level of business and many other aspects of the general workers should be stronger than some. In the company assigned tasks, the general workers to complete the more difficult tasks, they should take the initiative to take on more, but not with the workers buck-passing, to make the teacher who demeanor, Yong burden. I usually not only ask their own, in practice, I also do according to these requirements.

　　Third, strengthen business learning, improve the technical level

　　Science and technology continue to develop today, one day do not learn to be backward. In particular, this piece of electrical automation, no one hundred percent of all proficient in finished, so I usually have time to look at professional books. Over the past year, I have collected a large number of new professional books, constantly enrich themselves, continue to grasp the new knowledge. Such as "electrical design drawing", "electronic technology", "modern frequency technology", "DC in industrial applications" and so on, in the process of learning this knowledge, I learned a lot of new knowledge, such as: PLC programming control Principle, ABB inverter settings and control principles, SIPMOS high-power two-way SCR control principle, and so I really benefit! Not only broadened my knowledge, is still largely improved my technical level, But also I have a higher level of theoretical and technical knowledge of the study had a keen interest.

　　Fourth, the development of skills to each other to achieve social services

　　In the usual work, I often carry out technical discussions and exchanges with other workers, to share their knowledge and share with others, and learn from others who do not understand their knowledge and achieve common progress. I am fully integrated theory and practice, continue to accumulate experience, continue to study new business, which makes my skill level to a skilled, use the ease of the point.

　　To sum up, I feel worthy of the honorable title of electrician! But I, as a technical staff, can not be narcissistic now, but still continue to strengthen their own learning, continue to learn from each other, and only then can keep up with The pace of the times steady progress, but also be able to better serve the enterprises and serve the community.

　　工廠操作工英文自我評價 4

　　In the long-term work practice adhere to the "safety first, prevention first", strictly enforce the safety rules and regulations, based on their own positions, take the initiative to play a subjective initiative at the same time, adhere to the standard criteria for strict requirements themselves,Amount to complete the production work tasks.

　　Style solid, hard work hard working. Can strictly according to the standardization request, the procedure, the system and the measure, carries out each work, when meets the difficulty, perseverance, takes the initiative to overcome the difficult question which faces to face each duty which the leadership delivers. In the early stage of the workshop merger, the working facilities of the newly established Lechang power supply workshop were not complete. The workshop network could not be used. In order to transmit the production information in time, the communication equipment was put into operation to ensure the smooth flow of production information. In 20xx, I carried out the first contact catenary repair, as a electric power for the contact network focused on the preparation of the work plan, from learning to application, from ignorant to gradually understand, all embodies the tenacious struggle of professionalism.

　　Consciously strengthen the theory and business learning, theory and practice for the workshop safety management services. In daily production and life of diamond business technology and adhere to the modern business culture and scientific knowledge, and constantly improve their theoretical level, business ability and quality of cultivation, and focus on the knowledge used in production safety practice, with the workshop leaders do a good job in production management, For the first-line production to contribute. In the early 20xx to combat snow and ice disaster work, take the initiative to grasp the front-line dynamic information on the scene of the fault repair situation, equipment dynamic situation in a timely manner to make statistics, summarize, reported materials for the leadership to understand the dynamics of the scene to provide first-hand information, Quickly convey the higher order, whether fault repair or normal equipment inspection, regardless of day and night, adhere to earnestly complete all the summary of statistical materials reported work.

　　Team management and construction work, work independently. Since the team to play the team building management work, to combine the safety management team, closely around the theme of security work, to be diligent in thinking, to explore, loyalty, dare to dare tube, dare to dare to listen to team Staff advice, subject to the workshop leadership arrangements, do the right to insist on doing a good job, there are gaps in the initiative to find reasons, adjust the working methods, so as to sum up experience and improve the quality of work. Lechang power supply plant tube equipment scattered, daily management team and complex work, bow net, hydropower all kinds of professional team has to distinguish between different types of work groups of relatively unified management, no doubt with considerable difficulty, need to pay more labor , Often without rest for this day and night to work.

【工廠操作工英文自我評價】相關(guān)文章：

工廠操作工的自我評價02-16

工廠班組長英文自我評價11-29

車間操作工的轉(zhuǎn)正自我評價04-21

it英文自我評價09-08

英文自我評價11-04

英文的自我評價12-07

工廠員工自我評價04-02

求職的英文自我評價09-05

班級英文自我評價09-01

工作英文自我評價09-15